Deburring and finishing on pieces of steel, stainless, aluminum, PVC, corian, etc.
Description
The first group consists of a band of sandpaper that eliminates the inserts that may be derived from the cut
The first group is made up of a sandpaper band that makes it possible to eliminate the inserts that may be derived from laser or plasma cutting.
The second group, made up of three discs, is designed to round the edges of the pieces.
The third is composed of a roller which allows to give a uniform finish to the pieces.
The speed of the 2nd and 3rd groups and the conveyor are adjustable thanks to an inverter.
The handling of the machine is carried out from a synoptic table that incorporates the machine and is easy to use.
Sanding pressure is manual and displayed by analog gauges.
TECHNICAL DATA
DIMENSIONS:
Length: 2,350 mm
Width: 1,400 mm
Height: 1,890 mm
WEIGHT:
1400 Kg
VOLTAGE:
380V THREE PHASES + NEUTRAL + GROUND
POWER:
16Kw
AIR PRESSURE:
8 Atm
SANDING CONTROL:
Inverter from 0 to 1000 Rpm.
ADVANCE OF THE CONVEYOR:
FROM 0 to 14 m / min
SANDING PRESSURE:
Manual, analog indicators.
MACHINE CONTROL:
Manual.
